EV route planner
Plan the trip before the trip plans you
Johannesburg to Musina on the N1, or the N3 to Durban? Tell the planner where you are going, which car you drive and how much charge you have. It places the stops, like Polokwane on the N1, and warns you about the ones to worry about. Plan and save the route where you have signal: offline map regions are coming soon.
How it works
Four inputs, one plan
Step 1: Where from and where to
Use your location or type a place: Rosebank, Sandton, Polokwane, Musina. A built-in place list works even before the phone’s geocoder answers.
Step 2: Your car and your charge
Pick a vehicle and its usable range fills in from your profile (you can edit it). Set your current charge and the charge you want to arrive with.
Step 3: The stops
Each stop shows the leg distance, arrival battery %, the % to charge to, an estimated charge time, and the connector and power.
Step 4: Drive
Save the route, re-plan it with live availability later, and open it in Google Maps or Apple Maps. Voice guidance can read out the next stop.
What the planner takes into account
Rules a careful driver would use
The planning rules are written down and tested, so you can see why a stop was chosen.
A 10% reserve
Legs are planned so you never arrive below a 10% reserve, and the plan ends with at least the charge you asked to arrive with.
Fast charging to 80%
Charging slows sharply above 80%, so the planner prefers short stops to 80%, and warns you when a leg needs more.
Only chargers that fit
Out-of-order connectors and connectors your car cannot use are left out. Chargers within 30 km of the corridor are considered.
Warnings, not silence
Unknown status, all ports busy, low reliability or a slow charge above 80% are flagged on the stop, so you can choose an alternative.
Real road distances, roughly
Straight-line distance is multiplied by a road factor of 1.25. That is an estimate; the navigation app you hand over to gives the turn-by-turn route.
Honest when it cannot work
If no plan reaches the destination, the planner says which leg cannot be covered, and how far you can actually go.
Signal, maps and starting
What works where the signal is weak
Three different things: seeing the map, paying and starting a charge.
Offline map regions
Map regions saved on your phone for stretches without signal. Today, plan and save the route before you leave, where you have signal.
Coming soon
Paying
Top-ups and payments need a connection on the phone.
Starting a charge
Every start is authorised in real time, so the charger, its operator, Getz Hub and the platform must be reachable. Offline start is coming soon.
Worked example
Try the planning rules on Johannesburg to Musina
The illustration below is not a live planner: its chargers are made up and its distances rounded. It shows how range, departure charge and arrival buffer change the stops, and flags a stop with low reliability or unknown status so you can choose another.
Change the inputs
Real-world range on a full charge, departure charge and arrival buffer each move the stops in the illustration below.
Only charging nearby?
You do not need a route to find a charger: use the map and filters.
Work through Johannesburg to Musina, about 530 km
Seven made-up chargers along the N1, with rounded distances. Change the car’s range and charge to see how the stops change. The driver app does this with real chargers from connected operators, their live status and your vehicle profile.
2 charging stops · about 55 min charging · arrive with 16%
Demo charger near Bela-Bela at km 160 · DC 50 kW
- All ports busy right now
Demo charger near Louis Trichardt at km 420 · DC 60 kW
- Status unknown
Before a long trip
A corridor checklist, with a plan B
Status can change while you drive. These steps keep a dark or busy stop from ending the trip.
Step 1: Plan and save it where you have signal
Save the route before you leave; re-plan it with live availability just before you go.
Step 2: Check each stop’s last update
Look at the status the operator last reported and when. An old update is a reason to keep a backup.
Step 3: Check scheduled outages
Live Eskom schedules are coming soon in the app; until then check the published schedule for the towns you stop in.
Step 4: Pick a second stop
Note a backup charger before each stop you rely on, and leave enough charge to reach it.
Step 5: Know who to call
A physical problem with a charger goes to the station operator (contact on the charger); app or payment problems go to DriEv support.
Route planning questions
Does the planner use live availability?
It uses the same charger data as the map, including the last status reported by the operator. Status can change before you arrive, so the plan warns you about busy or unknown stops, and a saved route can be re-planned with live availability just before you leave.
What happens when I lose signal on the N1?
Plan and save the route before you leave, where you have signal. Offline map regions are coming soon. Starting a charge needs a connection, because each start is authorised in real time; a charge that starts offline is coming soon too.
How accurate are the charge times?
They are estimates from your car’s battery size, the charger’s power and a simple two-part charging curve (faster to 80%, slower after). Cold weather, a full car, high speed and a charger sharing power can all make real times longer.
I drive a company car. Does that change my stops?
It can: check your employer’s charging rules before choosing a stop, because company-paid charging may be limited to certain sites or hours. Charging paid by my employer explains the rest.
Planning a road trip in an EV?
DriEv is coming soon to the App Store and Google Play. Join and Getz will tell you when it is ready for your phone.