Skip to main content
DriEv by Getz Charging

EV route planner

Plan the trip before the trip plans you

Harare to Bulawayo, or out to Mutare? Tell the planner where you are going, which car you drive and how much charge you have. It places the stops, like Kwekwe on the way to Bulawayo, and warns you about the ones to worry about. Plan and save the route where you have signal: offline map regions are coming soon.

How it works

Four inputs, one plan

  1. Step 1: Where from and where to

    Use your location or type a place: Borrowdale, Harare, Kwekwe, Bulawayo. A built-in place list works even before the phone’s geocoder answers.

  2. Step 2: Your car and your charge

    Pick a vehicle and its usable range fills in from your profile (you can edit it). Set your current charge and the charge you want to arrive with.

  3. Step 3: The stops

    Each stop shows the leg distance, arrival battery %, the % to charge to, an estimated charge time, and the connector and power.

  4. Step 4: Drive

    Save the route, re-plan it with live availability later, and open it in Google Maps or Apple Maps. Voice guidance can read out the next stop.

What the planner takes into account

Rules a careful driver would use

The planning rules are written down and tested, so you can see why a stop was chosen.

  • A 10% reserve

    Legs are planned so you never arrive below a 10% reserve, and the plan ends with at least the charge you asked to arrive with.

  • Fast charging to 80%

    Charging slows sharply above 80%, so the planner prefers short stops to 80%, and warns you when a leg needs more.

  • Only chargers that fit

    Out-of-order connectors and connectors your car cannot use are left out. Chargers within 30 km of the corridor are considered.

  • Warnings, not silence

    Unknown status, all ports busy, low reliability or a slow charge above 80% are flagged on the stop, so you can choose an alternative.

  • Real road distances, roughly

    Straight-line distance is multiplied by a road factor of 1.25. That is an estimate; the navigation app you hand over to gives the turn-by-turn route.

  • Honest when it cannot work

    If no plan reaches the destination, the planner says which leg cannot be covered, and how far you can actually go.

Signal, maps and starting

What works where the signal is weak

Three different things: seeing the map, paying and starting a charge.

  • Offline map regions

    Map regions saved on your phone for stretches without signal. Today, plan and save the route before you leave, where you have signal.

    Coming soon

  • Paying with no data

    The USSD code works on phone signal alone: it pays for a session from your wallet and tops it up.

  • Starting a charge

    Every start is authorised in real time. With no data, start with an RFID card (ordered through the USSD menu); with the app, starting needs a connection.

Worked example

Try the planning rules on Harare to Bulawayo

The illustration below is not a live planner: its chargers are made up and its distances rounded. It shows how range, departure charge and arrival buffer change the stops, and flags a stop with low reliability or unknown status so you can choose another.

  • Change the inputs

    Real-world range on a full charge, departure charge and arrival buffer each move the stops in the illustration below.

  • Only charging nearby?

    You do not need a route to find a charger: use the map and filters.

Illustration · made-up chargers · not a live planner

Work through Harare to Bulawayo, about 440 km

Seven made-up chargers along the Harare–Bulawayo road, with rounded distances. Change the car’s range and charge to see how the stops change. The driver app does this with real chargers from connected operators, their live status and your vehicle profile.

2 charging stops · about 25 min charging · arrive with 15%

  1. Demo charger near Kwekwe at km 215 · DC 120 kW

    Leg 215 km · arrive 18% → charge to 80% · about 20 min

  2. Demo charger near Insiza at km 380 · DC 60 kW

    Leg 165 km · arrive 25% → charge to 35% · about 5 min

    • Low reliability score
In this example the demo charger near Gweru is out of order, so it is never chosen. Busy, unknown and low-reliability chargers count against a stop, so the planner prefers a slightly nearer charger without those problems, and warns you when it still picks one. Times are rough estimates for a car using 17 kWh per 100 km.

Before a long trip

A corridor checklist, with a plan B

Status can change while you drive. These steps keep a dark or busy stop from ending the trip.

  1. Step 1: Plan and save it where you have signal

    Save the route before you leave; re-plan it with live availability just before you go.

  2. Step 2: Check each stop’s last update

    Look at the status the operator last reported and when. An old update is a reason to keep a backup.

  3. Step 3: Check scheduled outages

    Check the ZESA slots for your stops on the load-shedding screen. Some sites have backup power, so a slot is a warning, not a certainty.

  4. Step 4: Pick a second stop

    Note a backup charger before each stop you rely on, and leave enough charge to reach it.

  5. Step 5: Know who to call

    A physical problem with a charger goes to the station operator (contact on the charger); app or payment problems go to DriEv support.

Route planning questions

Does the planner use live availability?

It uses the same charger data as the map, including the last status reported by the operator. Status can change before you arrive, so the plan warns you about busy or unknown stops, and a saved route can be re-planned with live availability just before you leave.

What happens when I lose signal between Kwekwe and Bulawayo?

Plan and save the route before you leave, where you have signal. Offline map regions are coming soon. With phone signal but no data, the USSD code pays for a session from your wallet; it does not start one. Start with an RFID card, or with the app once it is connected.

How accurate are the charge times?

They are estimates from your car’s battery size, the charger’s power and a simple two-part charging curve (faster to 80%, slower after). Cold weather, a full car, high speed and a charger sharing power can all make real times longer.

I drive a company car. Does that change my stops?

It can: check your employer’s charging rules before choosing a stop, because company-paid charging may be limited to certain sites or hours. Charging paid by my employer explains the rest.

Planning a road trip in an EV?

DriEv is coming soon to the App Store and Google Play. Join and Getz will tell you when it is ready for your phone.